Keysight N1911A

5 DISPlay Subsystem
242 N1911A/1912A P-Series Power Meters Programming Guide
DISPlay[:WINDow[1]|2]:FORMat <character_data>
This command selects the format of the selected window.
Syntax
:WIND
1
2
DISP
:FORM
character_data
Space
?
NOTE
– This command has the same purpose as DISPlay[:WINDow[1]|2]:
ANALog:LOWer <numeric_value>.
– This command does not allow the setting set to TRACe when either
measurement channel (for dual channel) is configured to initiate external
trigger buffering.