CALibration Subsystem 4
N1911A/1912A P-Series Power Meters Programming Guide 223
CALibration[1]|2:RCFactor <numeric_value>
This command is used with 8480 Series power sensors or N8480 Series power
sensors with Option CFT to set the reference calibration factor of the specified
channel. Reference calibration factors can also be set using sensor calibration
tables. The power meter uses the most recently set reference calibration factor.
Syntax
Parameters
Item Description/Default Range of Values
numeric_value A numeric value:
– DEF: the default is 100 %
– MIN: 1 %
– MAX:150 %
1.0 to 150.0 PCT
DEF
MIN
MAX
:RCF
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
CAL
1
2
To Next Page
Loading...
