Keysight N1911A

8 OUTPut Subsystem
312 N1911A/1912A P-Series Power Meters Programming Guide
OUTPut:ROSCillator[:STATe] <boolean>
This command enables or disables the POWER REF output.
Syntax
Example
Reset Condition
On reset, the POWER REF output is disabled.
Query
OUTPut:ROSCillator[:STATe]?
The query command enters a 1 or 0 into the output buffer indicating whether or
not the POWER REF is enabled.
– 1 is returned when the POWER REF output is enabled
– 0 is returned when the POWER REF output is disabled
Query Example
OUTP:ROSC:STAT 1 This command enables the POWER REF
output.
OUTP :STAT
:ROSC 0|OFF
1|ON
Space
?
OUTP:ROSC? This command queries the status of the
POWER REF output.