3 CALCulate Subsystem
190 N1911A/1912A P-Series Power Meters Programming Guide
CALCulate[1]|2|3|4:LIMit:CLEar[:IMMediate]
This command immediately clears the FCO (fail counter) of any limit failures for
the specified window. The FCO is used to determine the results returned by the
CALCulate[1]|2|3|4:LIMit:FAIL? query.
Syntax
Example
CALC2:LIM:CLE:IMM This command clears the FCO for the lower
window/upper measurement.
To Next Page
Loading...
