15 SERVice Subsystem
722 N1911A/1912A P-Series Power Meters Programming Guide
SERVice:SENSor[1]|2:TYPE?
This query identifies the sensor type connected to the power meter input
channel(s). For Keysight 8480 Series Sensors, either “A”, “B”, “D”, or “H” is
returned. For P-Series, E-Series and N8480 Series sensors, the model number
stored in EEPROM is returned
Syntax
Example
Error Messages
– If no sensor is connected, error –241, “Hardware missing” occurs.
SERV:SENS2:TYPE? This query returns either, “A”, “B”, “D”, or “H”
if a Keysight 8480 Series sensor is connected
to Channel B, or the sensor model number if
an P-Series, E-Series or N8480 Series
sensors is connected to Channel B.
To Next Page
Loading...
