N1911A/1912A P-Series Power Meters Programming Guide 5
General Safety Considerations
The following general safety precautions must be observed during all phases of
operation of this instrument. Failure to comply with these precautions or with
specific warnings elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Keysight Technologies assumes
no liability for the customer’s failure to comply with these requirements.
User Environment
This instrument is designed for indoor use only.
– Before this instrument is switched on, make sure it has been properly
grounded through the protective conductor of the ac power cable to a
socket outlet provided with protective earth contact. Any interruption of
the protective (grounding) conductor, inside or outside the instrument, or
disconnection of the protective earth terminal can result in personal
injury.
– Any adjustments or service procedures that require operation of the
instrument with protective covers removed should be performed only by
trained service personnel.
To Next Page
Loading...
