Keysight N1911A

CALCulate Subsystem 3
N1911A/1912A P-Series Power Meters Programming Guide 185
CALCulate[1]|2|3|4:GAIN:STATe <boolean>
This command is used on the specified window/measurement to enable and
disable the display offset set by the CALCulate[1]|2|3|4:GAIN[:MAGNitude]
command.
Syntax
Example
Reset Condition
On reset, the gain is disabled.
Query
CALCulate[1]|2|3|4:GAIN:STATe?
The query enters a 1 or 0 into the output buffer indicating the status of the display
offset.
– 1 is returned when the display offset feature is enabled
– 0 is returned when the display offset feature is disabled
CALC2:GAIN:STAT 1 This command enables the display offset
for the lower window/ upper measurement.
CALC
:STAT
:GAIN
0|OFF
1|ON
Space
?
1
2
3
4