3 CALCulate Subsystem
184 N1911A/1912A P-Series Power Meters Programming Guide
Example
Reset Condition
On reset, the display offset is set to 0 dB (DEF).
Query
CALCulate[1]|2|3|4:GAIN[:MAGNitude]? [MIN|MAX]
The query returns the current setting of the display offset or the value associated
with MIN and MAX.
Query Example
Error Message
If CALCulate[1]|2|3|4:GAIN[:MAGNitude] is set to ON while SENSe:SPEed is set
to 200, error –221, “Settings Conflict” occurs.
CALC2:GAIN 20 This command enters a display offset of
20 dB to the lower window/lower
measurement.
CALC1:GAIN? This command queries the current setting
of the display offset on the upper window/
upper measurement.
To Next Page
Loading...
