TRIGger Subsystem 14
N1911A/1912A P-Series Power Meters Programming Guide 641
Many of the above commands contain a numeric which represents a channel
number. For example TRIGger1 and TRIGger2 represent Channel A and Channel
B respectively. Channel B commands cannot be used with the single Channel
N1911A power meter and result in the error “Header suffix out of range.”
:HYSTeresis <numeric_value> page 664
:LEVel <numeric_value> page 666
:AUTO <boolean> page 668
:SLOPe <character_data> page 670
[:SEQuence[1]|2]
:COUNt <numeric_value> page 672
:DELay
:AUTO <boolean> page 674
:IMMediate [no query] page 676
:SOURce BUS|EXTernal|HOLD|
IMMediate|INTernal[[1]|2]
page 677
Keyword Parameter Form Notes Page
To Next Page
Loading...
