DISPlay Subsystem 5
N1911A/1912A P-Series Power Meters Programming Guide 247
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value A numeric value for the analog meter lower scale limit:
– DEF: the default is 20 dBm
– MIN: –150 dBm
– MAX: 230 dBm
The default units are defined by UNIT:POWer and
CALCulate:RELative:STATe.
–150 to 230 dBm
DEF
MIN
MAX
DISP:WIND2:MET:LOW 10 This command sets the lower window’s
analog meter lower scale limit.
:MET
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
:LOW
:WIND
1
2
DISP
To Next Page
Loading...
