TRIGger Subsystem 14
N1911A/1912A P-Series Power Meters Programming Guide 655
Example
Reset Condition
On reset, TRIGger:DELay:AUTO is set to ON.
Query
TRIGger:DELay:AUTO?
The query enters a 1 or 0 into the output buffer indicating the status of
TRIGger:DELay:AUTO.
– 1 is returned when it is ON
– 0 is returned when it is OFF
TRIG:DEL:AUTO ON This command enables a delay on Channel A.
To Next Page
Loading...
