15 SERVice Subsystem
696 N1911A/1912A P-Series Power Meters Programming Guide
Reset Condition
On reset, the signal is disabled.
Query
SERVice:BIST:TBASe:STAT?
The query enters a 1 or 0 into the output buffer indicating the status of the 10
MHz time base testing.
– 1 is returned when the signal is enabled
– 0 is returned when the signal is disabled
Query Example
SERV:BIST:TBASe:STAT? This command queries whether the test is
enabled or disabled.
To Next Page
Loading...
