KRONE ISOBUS Terminal
165
Pos: 48.154 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI- Press-Wickelvorric htung/Hauptmenüs/ Hauptmenü 4 Service/Motor einfahren @ 115\mod_13 39413235482_78.doc x @ 1010263 @ @ 1
Moving Engine in
• Use the softkey to move the engine in as long as the softkey is activated or until the
feed position is reached (see menu 3-1 “Manual Operation Baler”)
Saving Value:
• Press function key until the symbol appears briefly in the upper line
Note
The value is stored when the left bar has accepted the value of the centre bar.
Approaching Tying Position Engine
• Use softkey DEF to move the engine to the engine tying position as long as the softkey is
activated or until the position is reached.
• Adjust the engine tying position mechanically
To Next Page
Loading...
