2JZ/2JX/2JV/2H7-1
1-3-57
U106
Setting: [Bias]
1. Change the value using the +/- or numeric keys.
2. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
Reverse(Full) Transfer bias when plain paper is used 0 to 255 189
Reverse(Half) Transfer bias when thick paper is used 0 to 255 189
Reverse(BW) Transfer bias in black and white mode 0 to 255 189
Cleaning(Full) Cleaning control value when plain paper is
used
0 to 255 34
Cleaning(Half) Cleaning control value when thick paper is
used
0 to 255 34
Cleaning(BW) Cleaning control value in black and white
mode
0 to 255 34
To Next Page
Loading...
