2JZ/2JX/2JV/2H7-1
1-3-139
U977
Data capture mode
Description
Store the print data sent to the machine into USB memory.
Purpose
In case to occur the error at printing, check the print data sent to the machine.
Method
1. Insert USB memory in USB memory slot.
2. Turn the main power switch on.
3. Enter the maintenance item.
4. Press the start key.
5. Press [Execute].
6. Press the start key.
7. Send the print data to the machine.
Once the print data is stored into USB memory, [Complete] will be displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U984
Checking the developing unit number
Description
Displays the developing unit number.
Purpose
To check the developing unit number.
Method
1. Press the start key. The developing unit number for each color is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
DEVELOPING UNIT NO. (C) Cyan developing unit number
DEVELOPING UNIT NO. (M) Magenta developing unit number
DEVELOPING UNIT NO. (Y) Yellow developing unit number
DEVELOPING UNIT NO. (K) Black developing unit number
To Next Page
Loading...
