2JZ/2JX/2JV/2H7
2-3-22
YC30 1 +5V1 O 5 V DC 5 V DC power to HVCPWB
Connected
to the high
voltage con-
trol PWB
2 +5V1 O 5 V DC 5 V DC power to HVCPWB
3 SGND - - Ground
4 SGND - - Ground
5 PWB SCLK BUF O 0/3.3 V DC (pulse) HVCPWB clock signal
6 PWB SDI BUF I 0/3.3 V DC (pulse) HVCPWB serial communication data signal
7 PWB SDO BUF O 0/3.3 V DC (pulse) HVCPWB serial communication data signal
8 HVU SEL BUF O 0/3.3 V DC HVCPWB select signal
9 PWB RDY BUF I 0/3.3 V DC HVCPWB ready signal
10 DLP1 HV REM O 0/3.3 V DC Developing bias M: On/Off
11 DLP2 HV REM O 0/3.3 V DC Developing bias C: On/Off
12 DLP3 HV REM O 0/3.3 V DC Developing bias Y: On/Off
13 DLP4 HV REM O 0/3.3 V DC Developing bias K: On/Off
YC38 1 LSU FAN REM O 0/24 V DC LSUFM: On/Off
Connected
to the LSU
fan motor
and inner
tempera-
ture sensor
1 (40/40,
50/40 ppm
model)
2 +24V1 O 24 V DC 24 V DC power to LSUFM
3 SGND - - Ground
4 POLYGON
TEMP
I Analog INTEMS1 detection signal
YC39 1 +24V1 O 24 V DC 24 V DC power to DEVFM5
Connected
to the devel-
oping fan
motor 5
2 SIDE_DLP_FAN O 0/24 V DC DEVFM5: On/Off
Connector Pin No. Signal I/O Voltage Description
To Next Page
Loading...
