2JZ/2JX/2JV/2H7
1-3-22
U030
Checking the operation of the motors
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
*: 40/40, 50/40 ppm model only.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Operation
Feed Motor Paper conveying motor (PCM) is turned ON
DLP(Bk) Motor Developing motor K (DEVM-K) is turned ON
DLP (Color) Motor Developing motor MCY (DEVM-MCY) is turned ON
Fuser Motor Fuser motor (FUM) is turned ON
Exit Motor(CW) Eject motor (EM) is turned on clockrwise
Exit Motor(CCW) Eject motor (EM) is turned on counterclockwise
Color Release Motor Color release motor (CRM) is turned ON
Guide Motor Rotary guide motor (RGM) is turned ON
DU Motor Duplex motor (DUM) is turned ON
Job Separator Motor Job eject motor (JEM) is turned ON (option)
Regist Motor* Registration motor (RM) is turned ON
To Next Page
Loading...
