Kyocera TASKalfa 400ci - U930 Checking;Clearing the Charger Roller Count; U942 Setting of Deflection for Feeding from DP

2JZ/2JX/2JV/2H7
1-3-138
U930
Checking/clearing the charger roller count
Description
Displays the counts of the charger roller counter for checking or clearing.
Purpose
To check the count after replacement of the charger roller unit. To clear the counter value when replacing the
charger roller unit.
Method
1. Press the start key. The current counts of the charger roller count for each color is displayed.
Clearing
1. Select the counts to be cleared.
Select the counts for all and press [ALL CLEAR].
2. Press the start key. The counts is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U942
Setting of deflection for feeding from DP
Description
Adjusts the deflection generated when the optional DP is used.
Purpose
Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the DP is used.
Setting
1. Press the start key.
2. Select the item to be adjusted.
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the +/- or numeric keys.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of original
occurs, decrease the value.
7. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Charge Roller Count(K) Count value of black charger roller
Charge Roller Count(C) Count value of cyan charger roller
Charge Roller Count(M) Count value of magenta charger roller
Charge Roller Count(Y) Count value of yellow charger roller
Display Description Setting Initial Change in
REGIST TOP Deflection of single-sided original -31 to 31 0 0.176 mm
REGIST BACK Deflection of double-sided original -31 to 31 0 0.176 mm
REGIST MIX Deflection of dual scanning -31 to 31 0 0.176 mm