Kyocera TASKalfa 400ci - Density; Paper Source for Cover Paper; Continuous Scan; Special Paper Action

2JZ/2JX/2JV/2H7-1
1-3-144
Paper Source for Cover Paper
1. Press [Next] of Original/Paper Settings, cursor
down key and then [Change] of Paper Source for
Cover.
2. Select the paper source to load cover paper.
3. Press [OK].
Special Paper Action
1. Press [Next] of Original/Paper Settings, cursor
down key and then [Change] of Special Paper
Action.
2. Select [Adjust Print Direction] or [Speed Priority].
3. Press [OK].
Switching Unit of Measurement
1. Press [Change] of Measurement.
2. Select [mm] for metric or [inch] for inch.
3. Press [OK].
Error Handling
1. Press [Next] of Error Handling.
2. Press [Change] at the error you wish to change the
handling.
3. Select the error handling method in the selection
screen for each of the errors and then press [OK].
4. The previous screen appears. To set the handling
for a different error, repeat steps 2 and 3.
Paper Output
1. Press [Next] of Paper Output.
2. Press [Change] of Copy/Custom Box, Printer, or
FAX.
3. Select Output Tray.
For [Finisher Tray], [Tray B], [Tray C] or [Tray 1] to
[Tray 7], select [Face Up] (print surface up) or [Face
Down] (print surface down) as the paper orientation
at output.
4. Press [OK].
Orientation Confirmation
1. Press [Change] of Orientation Confirmation.
2. Select the default for [Off] or [On].
3. Press [OK].
Function Defaults
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of Original Orientation.
2. Select [Top Edge Top] or [Top Edge Left] for the
default.
3. Press [OK].
Continuous Scan
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of Continuous Scan.
2. Select [Off] or [On] for the default. Use the proce-
dure below to select the default quality setting for
originals.
3. Press [OK].
Original Image
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of Original Image.
2. Select the [Text+Photo], [Photo], [Print Photo],
[Text], [Map] or [for OCR] as the default.
3. Press [OK].
Scan Resolution
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of Scan Resolution.
2. Select the default resolution.
3. Press [OK].
Color Selection (Copy)
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of mode Color Selection(Copy).
2. Select the default color setting.
3. Press [OK].
Color Selection (Send/Store)
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of mode Color Sel. (Send/
Store).
2. Select the default color mode.
3. Press [OK].
File Format
1. Press cursor down key, [Next] of Function Defaults
and then [Change] of File Format.
2. Select the default file format.
3. Press [OK].
Density
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Density.
2. Select the default density.
3. Press [OK].
Zoom
1. Press cursor down key, [Next] of Function Defaults,
cursor down key and then [Change] of Zoom.
2. Select the default zoom setting.
3. Press [OK].