Kyocera TASKalfa 400ci - System Section; Paper Feed Section (Problems Solving)

2JZ/2JX/2JV/2H7
1-4-3
Section Jam code Conditions
Specified time
25/25 ppm
30/30 ppm
40/40 ppm
50/40 ppm
Color
50/40 ppm
B/W
System 00
Initial JAM
The power is turned on when a sensor in the con-
veying system is on.
---
04
Cover open JAM
Cover is open during paper conveying. - - -
05
Secondary paper
feed does not start
Secondary paper feed does not start within specified
time of arrival of paper at the registration section.
40 s 40 s 40 s
09
Sequence error
JAM
Sequence error is occurred between the machine
and 3000-sheet paper feeder.
---
Paper
feed sec-
tion
10
No paper feed from
cassette 1
Feed switch 1 (FSW1) does not turn on within the
specified time of paper feed clutch 1 (PFCL1) turn-
ing on and cannot be detected at the same timing
even after retry.
1713 ms 1224 ms 1028 ms
11
No paper feed from
cassette 2
Feed switch 2 (FSW2) does not turn on within the
specified time of paper feed clutch 2 (PFCL2) turn-
ing on and cannot be detected at the same timing
even after retry.
1800 ms 1286 ms 1080 ms
12
No paper feed from
optional cassette 3
Feed switch 3 (FSW3) does not turn on within the
specified time of PF paper feed clutch 1 (PFPFCL1)
turning on and cannot be detected at the same tim-
ing even after retry (paper feed from paper feeder).
2853 ms 2324 ms 2112 ms
Feed switch 3 (FSW3) does not turn on within the
specified time of PF paper feed clutch 1 (PFPFCL1)
turning on (paper feed from 3000-sheet paper
feeder).
670 ms 670 ms 670 ms
13
No paper feed from
optional cassette 4
The PF feed switch (PFFSW) does not turn on
within the specified time of PF paper feed clutch 2
(PFPFCL2) turning on and cannot be detected at the
same timing even after retry (paper feed from paper
feeder).
2853 ms 2324 ms 2112 ms
14
No paper feed from
MP tray
The MP paper feed switch (MPPFSW) does not turn
on within the specified time of the MP paper feed
clutch (MPPFCL) turning on and cannot be detected
at the same timing even after retry.
1540 ms 1100 ms 924 ms
15
Misfeed in paper
feeder horizontal
paper conveying
section 1
Paper path sensor 3 (PPS3) does not turn on within
specified time of PF paper feed clutch 2 (PFCL2)
turning on (paper feed from 3000-sheet paper
feeder).
360 ms 360 ms 360 ms
16
Misfeed in paper
feeder horizontal
paper conveying
section 2
Paper path sensor 2 (PPS2) does not turn on within
specified time of the paper path sensor 3 (PPS3)
turning on (paper feed from 3000-sheet paper
feeder).
380 ms 380 ms 380 ms