EasyManua.ls Logo

Kyocera TASKalfa 400ci - U328 Side Ejection Setting; U332 Setting the Size Conversion Factor; U341 Specific Paper Feed Location Setting for Printing Function

Kyocera TASKalfa 400ci
586 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2JZ/2JX/2JV/2H7-1
1-3-104
U328
Side ejection setting
Description
Sets whether to eject to the side of the machine when an optional curl eliminator is installed.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
U332
Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here is used to
convert the black ratio in relation to the A4/Letter size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Letter size.
Setting
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U341
Specific paper feed location setting for printing function
Description
Sets a paper feed location specified for printer output (only if a printer kit is installed).
Purpose
To use a paper feed location only for printer output.
A paper feed location specified for printer output cannot be used for copy output.
Method
1. Press the start key.
2. Select the paper feed location for the printer.
Two or more cassette can be selected.
When an optional paper feed device is not installed, the corresponding count is not displayed.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON To eject to the side of the machine
OFF Not to eject to the side of the machine
Display Description Setting range Initial setting
Calculation Rate Size parameter 0.1 to 3.0 1.0
Display Description
CASSETTE 1 Cassette 1
CASSETTE 2 Cassette 2
CASSETTE 3 Cassette 3 (optional paper feeder)
CASSETTE 4 Cassette 4 (optional paper feeder)
LCF Optional 3000-sheet paper feeder

Table of Contents

Other manuals for Kyocera TASKalfa 400ci

Related product manuals