Kyocera TASKalfa 400ci - Detaching and Refitting the Laser Scanner Unit

2JZ/2JX/2JV/2H7-1
1-5-21
(4) Detaching and refitting the laser scanner unit
Follow the procedure below to replace the laser scanner unit.
Procedure
1. Remove the left cover 1 (see page 1-5-47).
2. Remove the conveying guide.
Figure 1-5-35
3. Open the middle guide unit.
4. Remove two pins and springs.
Figure 1-5-36
Conveying guide
Middle guide
unit
Pin
Pin(spring)
Pin(spring)
Spring
Spring
Pin