2JZ/2JX/2JV/2H7
2-3-10
YC7 1 SGND - - Ground
Connected
to the main
PWB
2 SGND - - Ground
3 HSYNC_DP O 0/3.3 V DC (pulse) Image control signal
4 VSYNC_DP O 0/3.3 V DC (pulse) Image control signal
5 HSYNC_DN O 0/3.3 V DC (pulse) Image control signal
6 VSYNC_DN O 0/3.3 V DC (pulse) Image control signal
7 HSYNC_CP O 0/3.3 V DC (pulse) Image control signal
8 VSYNC_CP O 0/3.3 V DC (pulse) Image control signal
9 HSYNC_CN O 0/3.3 V DC (pulse) Image control signal
10 VSYNC_CN O 0/3.3 V DC (pulse) Image control signal
11 HSYNC_BP O 0/3.3 V DC (pulse) Image control signal
12 VSYNC_BP O 0/3.3 V DC (pulse) Image control signal
13 HSYNC_BN O 0/3.3 V DC (pulse) Image control signal
14 VSYNC_BN O 0/3.3 V DC (pulse) Image control signal
15 HSYNC_AP O 0/3.3 V DC (pulse) Image control signal
16 VSYNC_AP O 0/3.3 V DC (pulse) Image control signal
17 HSYNC_AN O 0/3.3 V DC (pulse) Image control signal
18 VSYNC_AN O 0/3.3 V DC (pulse) Image control signal
19 SGND - - Ground
20 SGND - - Ground
21 G6_EG_IRN O 0/3.3 V DC MPWB interrupt signal
22 NC - - Not used
23 G6_EG_SO O 0/3.3 V DC (pulse) MPWB serial communication data signal
24 NC - - Not used
25 G6_EG_SDIR O 0/3.3 V DC MPWB communication direction signal
26 NC - - Not used
27 G6_EG_SBSY O 0/3.3 V DC MPWB busy signal
28 NC - - Not used
29 24DOWN O 0/3.3 V DC MPWB 24 V down signal
30 NC - - Not used
YC8 1 +5V3 O 5 V DC 5 V DC power to INTEMS2
Connected
to the inner
tempera-
ture sensor
2 and ID
sensor 1/2
2 DLP_TEMP I Analog INTEMS2 detection signal
3 +5V1 O 5 V DC 5 V DC power to IDS1
4 GND - - Ground
5 REG_1S I Analog IDS1 detection signal
6 REG_1P I Analog IDS1 detection signal
7 REG_LED1 O Analog IDS1 control signal
8 +5V1 O 5 V DC 5 V DC power to IDS2
9 GND - - Ground
10 REG_2S I Analog IDS2 detection signal
11 REG_2P I Analog IDS2 detection signal
12 REG_LED2 O Analog IDS2 control signal
Connector Pin No. Signal I/O Voltage Description
To Next Page
Loading...
