2JZ/2JX/2JV/2H7
1-2-2
1-2-2 Unpacking and installation
(1) Installation procedure
Unpacking.
Removing the eject spacer and silica gel.
Removing the protective sheet and A3 paper.
Removing the tapes.
Installing the paper feeder (option).
Start
Adjusting the image.
Release of lift plate stopper.
Installing the toner containers.
Installing the waste toner box.
Loading paper.
Connecting the power cord.
Connecting the cassette heater.
Install other optional devices.
Installing the original platen or DP (option).
Release the scanner lever holding
the mirror 1 and 2 frames.
Completion of the machine installation.
To Next Page
Loading...
