Kyocera TASKalfa 400ci - U080 Setting the Economy Mode; U081 Adjusting the Correct Exposure

2JZ/2JX/2JV/2H7
1-3-45
U080
Setting the economy mode
Description
Sets the level in the economy mode.
Purpose
To increase or decrease the image density in the eco-print mode.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using the +/- or numeric keys.
Increasing the setting makes the image darker; decreasing it makes the image lighter.
4. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U081
Adjusting the correct exposure
Description
Adjusts the correct exposure in text and photo mode, text mode or photo mode.
Purpose
To be executed as required.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- or numeric keys.
Increasing the setting makes the image darker; decreasing it makes the image lighter.
4. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
ADJUST DATA1 For full color and 2 color copy mode 0 to 100 60
ADJUST DATA2 For black/white and single color mode 0 to 100 60
Display Description Setting range Initial setting
MIX ADJ
(FULL)
Adjusts the correct exposure in full color text
and photo mode
-3 to 3 0
TEXT ADJ
(FULL)
Adjusts the correct exposure in full color text
mode
-3 to 3 0
PHOTO ADJ
(FULL)
Adjusts the correct exposure in full color
photo mode
-3 to 3 0
MIX ADJ
(MONO)
Adjusts the correct exposure in black/white
text and photo mode
-3 to 3 0
TEXT ADJ
(MONO)
Adjusts the correct exposure in black/white
text mode
-3 to 3 0
PHOTO ADJ
(MONO)
Adjusts the correct exposure in black/white
photo mode
-3 to 3 0