Kyocera TASKalfa 400ci - Copy Settings; Quick Setup Registration; Sending Settings; Border Erase for Back Page

2JZ/2JX/2JV/2H7-1
1-3-146
(3) Copy Settings
Border Erase for Back Page
1. Press [Change] of Border Erase to Back Page.
2. Press [Same as Front Page] or [Do Not Erase].
3. Press [OK].
Paper Selection
1. Press [Change] of Paper Selection.
2. Press [Auto] or [Default Paper Source].
3. Press [OK].
Auto Paper Selection
1. Press [Change] of Auto Paper Selection.
2. Press [Most Suitable Size] or [Same as Original
Size].
3. Press [OK].
Auto % Priority
1. Press [Change] of Auto % Priority.
2. Select the default for [Off] or [On].
3. Press [OK].
Reserve Next Priority
1. Press [Change] of Reserve Next Priority.
2. Select the default for [Off] or [On].
3. Press [OK].
Preset Limit
1. Press [Change] of Preset Limit.
2. Press [+] or [-] or use the numeric keys to enter the
limit for the number of copies.
3. Press [OK].
Quick Setup Registration
1. Press [Next] of Quick Setup Registration.
2. Press [Change] of the function to be registered in
Quick Setup.
3. Select a key (1-6) allocated on the Quick Setup
Registration screen. Press [Off] to delete a key
from the Quick Setup.
4. Press [OK]. If you overwrite the setting, a confirma-
tion screen appears. Press [Yes].
(4) Sending Settings
Quick Setup Registration
1. Press [Next] of Quick Setup Registration.
2. Press [Change] of the function to be registered in
Quick Setup.
3. Select a key (1-6) allocated on the Quick Setup
Registration screen. Press [Off] to delete a key
from the Quick Setup.
4. Press [OK]. If you overwrite the setting, a confirma-
tion screen appears. Press [Yes].
Color Type
1. Press [Change] of Color Type.
2. Select [RGB] or [sRGB].
3. Press [OK].
Setting the Default Send Screen
1. Press [Change] of Default Screen.
2. Press [Destination] or [Address Book].
3. Press [OK].
(5) Document Box/Removable Memory Settings
Removable Memory (JPEG Print)
1. Press [Next] of Removable Memory and then
[Change] of JPEG Print.
2. Select [Fit to Paper Size], [Image Resolution] or [Fit
to Print Resolution].
3. Press [OK].
Quick Setup Registration
1. Press [Next] of Quick Setup Registration.
2. Press [Next] of Store File or Send.
3. Press [Change] of the function to be registered in
Quick Setup.
4. Select a key (1-6) allocated on the Quick Setup
screen. Press [Off] to delete a key from the Quick
Setup.
5. Press [OK]. If you overwrite the setting, a confirma-
tion screen appears. Press [Yes].