2JZ/2JX/2JV/2H7-1
1-3-101
U265
Setting OEM purchaser code
Description
Sets the OEM purchaser code.
Purpose
Sets the code when replacing the main PWB and the like.
Setting
1. Press the start key.
2. Change the preset value using the numeric keys.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U276
Setting the copy count mode
Description
Sets the count mode of single color mode.
Purpose
To change the charging counter which counts up in single color printing.
Setting
1. Press the start key.
2. Select the mode.
Initial setting: MODE 0
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U284
Setting 2 color copy mode
Description
Sets whether to use 2 color copy mode.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
If ON is selected, 2-color copy will be displayed on the color function screen.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
MODE 0 This lets the full color counter count up in single color
MODE 1 This lets the single color counter count up in single color
Display Description
ON 2 color copy mode is enabled
OFF 2 color copy mode is disabled
To Next Page
Loading...
