2JZ/2JX/2JV/2H7-1
2-3-16
YC18 A1 +24V2 O 24 V DC 24 V DC power to FRPWB-M
Connected
to the main
front PWB
A2 +24V2 O 24 V DC 24 V DC power to FRPWB-M
A3 +24V2 O 24 V DC 24 V DC power to FRPWB-M
A4 SGND - - Ground
A5 +3.3V1 O 3.3 V DC 3.3 V DC power to FRPWB-M
A6 ERS4_DR O 24/0 V DC CL-K: On/Off
A7 DRM4_POSITIO
N
I 0/3.3 V DC DPS-K: On/Off
A8 FRONT_FAN O 0/24 V DC RFM: On/Off
A9 TPD4 I Analog TS-K detection signal
A10 DLP_VCONT4 O Analog TS-K control signal
A11 +5V1 O 5 V DC 5 V DC power to FRPWB-M
A12 SGND - - Ground
A13 SGND - - Ground
A14 +5V3 O 5 V DC 5 V DC power to FRPWB-M
A15 PGND - - Ground
A16 +24V1 O 24 V DC 24 V DC power to FRPWB-M
A17 PGND - - Ground
A18 PGND - - Ground
A19 PGND - - Ground
B1 CONTAIN FAN O 0/24 V DC CFM: On/Off
B2 GUIDE_MT_DIR O 0/3.3 V DC RGM drive switch signal
B3 GUIDE_MT_CL
K
O 0/3.3 V DC (pulse) RGM clock signal
B4 GUIDE_MT_DR O 0/3.3 V DC RGM: On/Off
B5 GUIDE_POSITI
ON
I 0/3.3 V DC RGS: On/Off
B6 FSR_EXIT_JAM I 0/3.3 V DC ESW: On/Off
B7 JOB_EXIST I 0/3.3 V DC JEPSW: On/Off
B8 JOB_LED - - Not used
B9 SP_CONT O Analog Separation bias control voltage
B10 SEP_REM O 0/3.3 V DC Separation bias control voltage: On/Off
B11 T2_INV_CONT O Analog Secondary transfer (reverse) bias control voltage
B12 T2_CONT O Analog Secondary transfer bias control voltage
B13 T2_REM O 0/3.3 V DC Secondary transfer bias: On/Off
B14 GUIDE_MT_PD O 0/3.3 V DC RGM control signal
B15 I2C_SDA4 I 0/3.3 V DC (pulse) OUTTEMS EEPROM data signal
B16 I2C_SCL4 O 0/3.3 V DC (pulse) OUTTEMS EEPROM clock signal
B17 FRONT_OPEN I 0/3.3 V DC FCSW: On/Off
B18 EEP_SDA3 I/O 0/3.3 V DC (pulse) EEPROM data signal
B19 EEP_SCL3 O 0/3.3 V DC (pulse) EEPROM clock signal
Connector Pin No. Signal I/O Voltage Description
To Next Page
Loading...
