2JZ/2JX/2JV/2H7
1-3-102
U285
Setting service status page
Description
Determines displaying the toner coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Press [COVERAGE] and select ON or OFF.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U325
Setting the bias between pages
Description
Determines the distance between two pages when printing pages of high print coverage.
Purpose
To change the setting when pages are not printed continuously due to an intermittent toner replenishing that
may happen when attempting to print a highly dense document.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
Setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON Displays the toner coverage
OFF Not to display the toner coverage
Display Description
ON By proactively detecting the print coverage for the first page, the printing
speed is automatically adjusted so that an optimal print coverage is obtained
from the second and onward.
OFF Does not automatically adjust the distance between pages, regardless of
Print cov-
erage ratio
50/40 ppm model 40/40 ppm model 30/30 ppm model 25/25 ppm model
Print
speed
(ppm)
Paper
interval
(mm)
Print
speed
(ppm)
Paper
interval
(mm)
Print
speed
(ppm)
Paper
interval
(mm)
Print
speed
(ppm)
Paper
interval
(mm)
Below 30 % 50.0 90.0 40.0 105.0 30.0 290.0 25.0 294.0
30 % 50.0 90.0 40.0 105.0 30.0 290.0 25.0 294.0
40 % 37.5 190.0 30.0 210.0 22.5 456.7 18.8 460.2
50 % 30.0 290.0 24.0 315.0 18.0 623.3 15.0 630.0
60 % 25.0 390.0 20.0 420.0 15.0 790.0 12.5 798.0
70 % 21.4 490.0 17.1 525.0 12.9 956.7 10.7 967.6
80 % 18.8 590.0 15.0 630.0 11.3 1123.3 9.4 1134.0
90 % 16.7 690.0 13.3 735.0 10.0 1290.0 8.3 1302.0
To Next Page
Loading...
