Kyocera TASKalfa 400ci - Paper Conveying Section; Fuser Section

2JZ/2JX/2JV/2H7
1-4-5
Paper
feed sec-
tion
26
Multiple sheets in
MP tray paper feed
section
The MP paper conveying switch (MPPCSW) does
not turn on within specified time of MP paper feed
switch (MPPFSW) turning on.
3507 ms 2505 ms 2104 ms
The MP paper conveying switch (MPPCSW) does
not turn off within specified time of MP paper feed
switch (MPPFSW) turning off.
4173 ms 2981 ms 2504 ms
The registration switch (RSW) does not turn on
within specified time of MP paper conveying switch
(MPPCSW) turning on.
2787 ms 1990 ms 1672 ms
The registration switch (RSW) does not turn off
within specified time of MP paper feed switch
(MPPFSW) turning off.
2120 ms 1514 ms 1272 ms
Paper
convey-
ing sec-
tion
30
Misfeed in registra-
tion/transfer sec-
tion
The registration switch (RSW) does not turn off
within specified time of feed switch 1 (FSW1) turning
off.
1413 ms 1010 ms 848 ms
31
Misfeed round the
transfer belt
The loop sensor (LS) does not turn on within speci-
fied time of the registration clutch (RCL) turning on.
973 ms 695 ms 584 ms
Fuser
section
40
Misfeed in fuser
section (MP tray)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
41
Misfeed in fuser
section (cassette
1)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
42
Misfeed in fuser
section (cassette
2)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
43
Misfeed in fuser
section (cassette
3)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
44
Misfeed in fuser
section (cassette
4)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
45
Misfeed in fuser
section (3000-
sheet paper
feeder)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
46
Misfeed in fuser
section (duplex
section)
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
967 ms 690 ms 580 ms
Section Jam code Conditions
Specified time
25/25 ppm
30/30 ppm
40/40 ppm
50/40 ppm
Color
50/40 ppm
B/W