Kyocera TASKalfa 400ci - Removing the Paper Feed Pulley; Removing the Separation Pulley

2JZ/2JX/2JV/2H7
1-5-4
5. Remove the stop ring from the forwarding
pulley retainer.
6. Remove the forwarding pulley from the for-
warding shaft.
Figure 1-5-5
Removing the paper feed pulley
7. Remove two stop rings from the primary
paper feed unit.
8. Pull the paper feed shaft in the direction of
the arrow and remove the paper feed pulley.
Figure 1-5-6
Removing the separation pulley
9. Remove the stop ring from the primary
paper feed unit.
10. Pull the separation shaft in the direction of
the arrow and remove the separation pulley.
Figure 1-5-7
Stop ring
Forwarding shaft
Forwarding pulley retaine
r
Forwarding pulley
Stop ring
Stop ring
Paper feed pulley
Paper feed shaft
Stop ring
Separation pulley
Separation shaft