Kyocera TASKalfa 400ci - U051 Adjusting the Deflection in the Paper

2JZ/2JX/2JV/2H7
1-3-29
U051
Adjusting the deflection in the paper
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Method
1. Press the start key.
2. Select the item to be adjusted.
*: 50/40 ppm model only.
Adjustment
1. Select the item.
When [Paper Loop Amount] is selected
Large size: 218 mm or more in width of paper.
*1: 40/40, 50/40 ppm model *2: 25/25, 30/30 ppm model
Maintenance
item No.
Description
Display Description
Paper Loop Amount Deflection adjustment
Paper Loop Amount B/W* Deflection adjustment in black and white mode
Display Description Setting
range
Initial
setting
Change in
value per step
MPT (Large) Paper feed from MP tray
(when large size paper is used)
-30 to 20 0 1 mm
MPT Half (L) Paper feed from MP tray
(when large size thick paper is used)
-30 to 20 7
*1
/1
*2
1 mm
Cassette (L) Paper feed from cassette
(when large size paper is used)
-30 to 20 0 1 mm
Cassette Half (L) Paper feed from cassette
(when large size thick paper is used)
-30 to 20 7
*1
/1
*2
1 mm
Duplex (L) Duplex mode (second)
(when large size paper is used)
-30 to 20 -2
*1
/01
*2
1 mm
Duplex Half (L) Duplex mode (second)
(when large size thick paper is used)
-30 to 20 7
*1
/6
*2
1 mm
MPT (Small) Paper feed from MP tray
(when small size paper is used)
-30 to 20 0 1 mm
MPT Half (S) Paper feed from MP tray
(when small size thick paper is
-30 to 20 -2
*1
/-9
*2
1 mm
Cassette (S) Paper feed from cassette
(when small size paper is used)
-30 to 20 0 1 mm
Cassette Half (S) Paper feed from cassette
(when small size thick paper is
-30 to 20 -2
*1
/-9
*2
1 mm
Duplex (S) Duplex mode (second)
(when small size paper is used)
-30 to 20 0 1 mm
Duplex Half (S) Duplex mode (second)
(when small size thick paper is
-30 to 20 -2
*1
/-4
*2
1 mm