2JZ/2JX/2JV/2H7-1
1-3-86
U237
Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the Inner tray in 3000-sheet document fin-
isher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [MAIN TRAY]
1. Change the setting using the +/- or numeric keys.
Initial setting: 0
2. Press the start key. The setting is set.
Setting: [MIDDLE TRAY]
1. Change the setting using the +/- or numeric keys.
Initial setting: 0
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
MAIN TRAY Number of sheets of stack on the main tray
MIDDLE TRAY Number of sheets of stack on the internal tray for sort copying or sta-
ple copying
Display Description
0 3000 sheets
1 1500 sheets
Display Description
0 For sort copying: 30 sheets, for staple copying: 50 sheets
1 For sort copying: 30 sheets, for staple copying: 30 sheets
To Next Page
Loading...
