2JZ/2JX/2JV/2H7-1
1-3-124
U467
Setting the color registration adjustment
Description
Sets the color registration adjustment and transfer belt speed correction. Also, determines the conditions by
which color registration correction is executed depending on the LSU temperature.
Purpose
If color variance is uneven due to a sensor failure, etc., turn this off and temporarily make a manual adjust-
ment.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [Color Regist Adjustment]
1. Select ON or OFF.
Initial setting: ON
2. Press the start key. The setting is set.
Setting: [Transfer Belt Speed Adj.]
1. Select ON or OFF.
Initial setting: ON
2. Press the start key. The setting is set.
Setting: [Set Timing]
1. Change the setting value using the +/- or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Color Regist Adjustment Setting the color registration correction operation
Transfer Belt Speed Adj. Setting the transfer belt speed correction operation
Set Timing After the previous correction is executed, color registration is com-
pensated as the LSU temperature varies by the value determined.
Display Description
ON Enables the color registration correction operation.
OFF Disables the color registration correction operation.
Display Description
ON Enables the transfer belt speed correction operation.
OFF Disables the transfer belt speed correction operation.
Display Description Setting range Initial setting
TIMING Conditions for execution depending on the
LSU temperature variation
2 to 10 2
To Next Page
Loading...
