2JZ/2JX/2JV/2H7-1
1-3-87
U240
Checking the operation of the finisher
Description
Turns each motor and solenoid of 3000-sheet document finisher ON.
Purpose
To check the operation of each motor and solenoid of the document finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Method: [FINISHER MOTOR]
1. Select the item to be operated.
2. Pess the start key. The operation starts.
Maintenance
item No.
Description
Display Description
FINISHER MOTOR Checking the motor of the document finisher
FINISHER SOL Checking the solenoid of the document finisher
MAIL BOX Checking the motor of the mailbox
BOOKLET Checking the motor of the center-folding unit
Display Motor
FEED IN MOTOR M Paper entry motor (PEM) is turned on at middle speed
FEED IN MOTOR L Paper entry motor (PEM) is turned on at low speed
CONV MOTOR H Paper conveying motor (PCM) is turned on at high speed
CONV MOTOR M Paper conveying motor (PCM) is turned on at middle speed
CONV MOTOR L Paper conveying motor (PCM) is turned on at low speed
EJECT MOTOR H Eject motor (EJM) is turned on at high speed
EJECT MOTOR M Eject motor (EJM) is turned on at middle speed
EJECT MOTOR L Eject motor (EJM) is turned on at low speed
SUB PATH MOTOR H Relief path motor (RPM) is turned on counterclockwise
SUB PATH MOTOR M Relief path motor (RPM) is turned on clockrwise
BUNDLE UP MOTOR Paper conveying belt motor 1 (PCBM1) is turned on
BUNDLE DOWN MOTOR Paper conveying belt motor 2 (PCBM2) is turned on
WIDTH TEST(A3) Side registration motor 1/2 (SRM1/2) are turned on
WIDTH TEST(LD) Side registration motor 1/2 (SRM1/2) are turned on
STAPLE FR MOTOR Staple moving motor 1 (STMM1) is turned on
STAPLE S MOTOR Staple moving motor 2 (STMM2) is turned on
STAPLE MOTOR Staple motor (STM) is turned on
TRAY MOTOR Main tray motor (MTM) is turned on
PUNCH MOTOR Punch motor (PUNM) is turned on
To Next Page
Loading...
