2JZ/2JX/2JV/2H7
1-4-6
Eject
section
50
Misfeed in eject
section
The eject switch (ESW) does not turn off within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning off.
2767 ms 1976 ms 1660 ms
51
Misfeed in job sep-
arator eject section
The job eject switch (JESW) does not turn off within
specified time of the eject switch (ESW) turning off.
1047 ms 748 ms 628 ms
During switchback ejection, the job eject switch
(JESW) does not turn off within specified time.
Paper
length +
1133 ms
Paper
length +
810 ms
Paper
length +
680 ms
During switchback ejection, the job eject switch
(JESW) does not turn off within specified time of the
eject switch (ESW) turning off.
2720 ms 1943 ms 1632 ms
During switchback ejection, the job eject switch
(JESW) does not turn on within specified time.
1800 ms 1286 ms 1080 ms
During switchback ejection/job separator ejection,
the job eject switch (JESW) does not turn on within
specified time of the eject switch (ESW) turning on.
1667 ms 1190 ms 1000 ms
During finisher ejection, the finisher eject switch
(FESW) does not turn on within specified time of the
eject switch (ESW) turning on.
1913 ms 1367 ms 1148 ms
During finisher ejection, the finisher eject switch
(FESW) does not turn off within specified time of the
eject switch (ESW) turning off.
2840 ms 2029 ms 1704 ms
Feed-
shift sec-
tion
52
Misfeed in feedshift
section
During paper switchback operation in the main body,
the feedshift switch (FSSW) does not turn on within
specified time.
1913 ms 1367 ms 1148 ms
Duplex
section
60
Misfeed in duplex
paper conveying
section 1
The duplex switch (DUSW) does not turn on within
specified time of the feedshift switch (FSSW) turning
on.
4313 ms 3081 ms 2588 ms
During duplex refeeding, the duplex switch (DUSW)
does not turn off within specified time of the registra-
tion switch (RSW) turning on.
1220 ms 871 ms 732 ms
61
Misfeed in duplex
paper conveying
section 2
During duplex refeeding, the registration switch
(RSW) does not turn on within specified time.
1080 ms 771 ms 648 ms
Optional
DP
70
No original feed
The original feed switch (OFSW) does not turn on
within specified time during the first sheet feeding
(Retry 5 times).
1159 ms 705 ms 705 ms
The original feed switch (OFSW) does not turn on
within specified time during the second sheet feed-
ing (Retry 5 times).
1159 ms 705 ms 705 ms
During original tray ascent, the tray upper limit
switch (TULSW) does not turn on within specified
time.
2 s2 s2 s
Section Jam code Conditions
Specified time
25/25 ppm
30/30 ppm
40/40 ppm
50/40 ppm
Color
50/40 ppm
B/W
To Next Page
Loading...
