Kyocera TASKalfa 400ci - U034 Adjusting the Print Start Timing

2JZ/2JX/2JV/2H7
1-3-25
U034
Adjusting the print start timing
Description
Adjusts the leading edge registration or center line.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Make the adjustment if there is a regular error between the center lines of the copy image and original.
Method
1. Press the start key.
2. Select the item to be adjusted.
*: 50/40 ppm model only.
Adjustment: Leading edge registration adjustment
1. Select [LSUOUT TOP] or [LSUOUT TOP B/W].
2. Select the item.
When [LSUOUT TOP] is selected.
Large size: 218 mm or more in width of paper.
Maintenance
item No.
Description
Display Description
LSUOUT TOP Leading edge registration adjustment
LSUOUT LEFT Center line adjustment
LSUOUT TOP B/W* Leading edge registration adjustment in black/white mode
Display Description Setting
range
Default
setting
Change in
value per step
LSUOUT TOP
MPT (L)
Paper feed from MP tray
(when large size paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
MPT Half (L)
Paper feed from MP tray
(when large size thick paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
CAS (L)
Paper feed from cassette
(when large size paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
CAS Half (L)
Paper feed from cassette
(when large size thick paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
DUP (L)
Duplex mode (second)
(when large size paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
DUP Half (L)
Duplex mode (second)
(when large size thick paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
MPT (S)
Paper feed from MP tray
(when small size paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
MPT Half (S)
Paper feed from MP tray
(when small size thick paper is
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
CAS (S)
Paper feed from cassette
(when small size paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
CAS Half (S)
Paper feed from cassette
(when small size thick paper is
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
DUP (S)
Duplex mode (second)
(when small size paper is used)
-3.0 to 3.0 0 0.1 mm
LSUOUT TOP
DUP Half (S)
Duplex mode (second)
(when small size thick paper is
-3.0 to 3.0 0 0.1 mm