Kyocera TASKalfa 400ci - U106 Setting the Voltage for the Secondary Transfer

2JZ/2JX/2JV/2H7-1
1-3-54
U106
Setting the voltage for the secondary transfer
Description
Sets the control voltage for the secondary transfer depending on each paper type.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Method
1. Press the start key.
2. Select the item to be set. The screen for executing each item is displayed.
Setting: [Light/Normal 1 Full Front]
1. Change the value using the +/- or numeric keys.
*1: 40/40, 50/40 ppm model *2: 25/25, 30/30 ppm model
2. Press the start key. The value is set.
Maintenance
item No.
Description
Display Description
Light/Normal 1 Full Front Control voltage for the transfer bias for the first side on paper with
thickness 60 g/m
2
to 64 g/m
2
and 60 g/m
2
to 75 g/m
2
Normal 2/3 Full Front Control voltage for the transfer bias for the first side on paper with
thickness 75 g/m
2
to 105 g/m
2
Light/Normal 1 Full Back Control voltage for the transfer bias for the second side on paper with
thickness 60 g/m
2
to 64 g/m
2
and 60 g/m
2
to 75 g/m
2
Normal 2/3 Full Back Control voltage for the transfer bias for the second side on paper with
thickness 75 g/m
2
to 105 g/m
2
Light Normal1(F)Front BW Control voltage for the transfer bias for the first side on paper with
thickness 60 g/m
2
to 64 g/m
2
and 60 g/m
2
to 75 g/m
2
(in black and
white mode)
Normal 2/3(F)Front BW Control voltage for the transfer bias for the first side on paper with
thickness 75 g/m
2
to 105 g/m
2
(in black and white mode)
Light/Normal1(F)Back BW Control voltage for the transfer bias for the second side on paper with
thickness 60 g/m
2
to 64 g/m
2
and 60 g/m
2
to 75 g/m
2
(in black and
white mode)
Normal 2/3(F)Back BW Control voltage for the transfer bias for the second side on paper with
thickness 75 g/m
2
to 105 g/m
2
(in black and white mode)
Heavy 1 - 3 (H)Front Control voltage for the transfer bias for the first side on paper with
thickness 105 g/m
2
to 220 g/m
2
Heavy 1 - 3 (H)Back Control voltage for the transfer bias for the second side on paper with
thickness 105 g/m
2
to 220 g/m
2
OHP Control voltage for the transfer bias for transparencies
Bias Transfer bias value
Display Description Setting range Initial setting
Width<160 Small sizes (under 160 mm wide) 0 to 255 160
*1
/150
*2
160<=Width<220 Medium sizes (more than 160 to under
220 mm wide)
0 to 255 140
*1
/120
*2
220<=Width Large sizes (more than 220mm wide) 0 to 255 110
*1
/90
*2