2JZ/2JX/2JV/2H7
1-3-24
U032
Checking the operation of the clutches
Description
Turns each clutch on.
Purpose
To check the operation of each clutch.
Method
1. Press the start key.
2. Select the clutch to be operated.
3. Press the start key. The clutch turns on for 1 s.
To stop motor driving, press [MOTOR ON] again.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U033
Checking the operation of the solenoids
Description
Applies current to each solenoid in order to check its ON status.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key.
2. Select the solenoid to be operated.
3. Press the start key. The solenoid turns on for 1 s.
To stop motor driving, press [MOTOR ON] again.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Clutches
Feed1 Clutch Paper feed clutch 1 (PFCL1)
Feed2 Clutch Paper feed clutch 2(PFCL2)
MPF Feeder On/Off Clutch MP paper feed clutch (MPPFCL)
MID Roller Clutch Middle clutch (MCL) (25/25, 30/30 ppm model only)
Vertical CONV. Clutch1 Feed clutch 1 (FCL1) (40/40, 50/40 ppm model only)
MPF Feed Clutch MP paper conveying clutch (MPPCCL)
Regist Clutch Registration clutch (RCL) (25/25, 30/30 ppm model only)
Vertical CONV. Clutch2 Feed clutch 2 (FCL2) (40/40, 50/40 ppm model only)
Fuser Release Clutch Fuser clutch (FUCL)
MOTOR ON The paper conveying motor (PCM) is turned ON.
Display Solenoids
Eject Branch Solenoid Job feedshift solenoid (JFSSOL)
MPT Pick up Solenoid MP solenoid (MPSOL)
MOTOR ON The paper conveying motor (PCM) is turned ON.
To Next Page
Loading...
