2JZ/2JX/2JV/2H7
1-3-23
U031
Checking switches and sensors for paper conveying
Description
Displays the on-off status of each paper detection switch or sensor on the paper path.
Purpose
To check if the switches and sensor for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When a switch or sensor is detected to be in the ON position, the display for that switch or sensor will be
highlighted.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Switches and sensors
MPF Unit MP tray switch (MPTSW)
MPF Feed1 JAM MP paper feed switch (MPPFSW)
MPF Feed2 JAM MP paper conveying switch (MPPCSW)
Cassette1 JAM Feed switch 1 (FSW1)
Cassette2 JAM Feed switch 2 (FSW2)
Desk/Deck JAM Feed switch 3 (FSW3)
Regist Roller JAM Registration switch (RSW)
Fuser JAM Loop sensor (LS)
Exit JAM Eject switch (ESW)
DU Feed1 JAM Feedshift switch (FSSW)
DU Feed2 JAM Duplex switch (DUSW)
Paper Full Paper full sensor (PFS)
JobSepa FIN Exit JAM Finisher eject switch (FESW) (option)
JobSepa Inner JAM1 Job eject switch (JESW) (option)
JobSepa Inner JAM2 Job separator eject switch (JBESW) (option)
To Next Page
Loading...
