Kyocera TASKalfa 400ci - Image Formation Problems

2JZ/2JX/2JV/2H7
1-4-60
1-4-3 Image formation problems
(1)No image appears
(entirely white).
(2)No image appears
(entirely black).
(3)Dirty on the back
side.
(4)Image is too light. (5)The background is
colored.
See page 1-4-61. See page 1-4-61. See page 1-4-62. See page 1-4-62. See page 1-4-63.
(6)A white line
appears longitudi-
nally.
(7)A line appears lon-
gitudinally.
(8)A line appears lat-
erally.
(9)One side of the
copy image is
darker than the
other.
(10)Dots appear on
the image.
See page 1-4-63. See page 1-4-63. See page 1-4-64. See page 1-4-64. See page 1-4-64.
(11)The leading edge
of the image is
consistently mis-
aligned with the
original.
(12)The leading edge
of the image is
sporadically mis-
aligned with the
original.
(13)Paper creases. (14)Offset occurs. (15)Image is partly
missing.
See page 1-4-64. See page 1-4-65. See page 1-4-65. See page 1-4-65. See page 1-4-66.
(16)Fusing is poor. (17)Image is out of
focus.
(18)Colors are printed
offset to each
other.
(19)Image center
does not align with
the original center.
See page 1-4-66. See page 1-4-66. See page 1-4-67. See page 1-4-67.