Kyocera TASKalfa 400ci - U035 Setting the Printing Area for Folio Paper; U037 Checking the Operation of the Fan Motors

2JZ/2JX/2JV/2H7
1-3-28
U035
Setting the printing area for folio paper
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U037
Checking the operation of the fan motors
Description
Drives the fan motors.
Description
To check the operation of the fan motors.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Setting Setting range Initial setting
LENGTH DATA Length 330 to 356 mm 330
WIDTH DATA Width 200 to 220 mm 210
Display Operation
Fixing Fan Fuser fan motor (FUFM) is turned on.
Developing Fan Developing fan motor 1, 2 (DEVFM1, 2) are turned on.
LSU Rear Fan Developing fan motor 5 (DEVFM5) is turned on.
Low Power Source Fan Power source fan motor 2 (PSFM2) is turned on.
Mid Transfer Fan Transfer fan motor 1 (TRFM1) is turned on.
Power Source Fan Power source fan motor 1 (PSFM1) is turned on.
Conveying Fan Paper conveying fan motor 1, 2 (PCFM1, 2) are turned on.
CONT Fan Container fan motor (CFM) is turned on.
POLYGON Motor Fan LSU fan motor (LSUFM) is turned on.
Rotary Guide Fan Rotary fan motor (RFM) is turned on.
Loop Sensor Fan Loop fan motor (LFM) is turned on.
Mid Transfer Belt Fan Transfer fan motor 2, 3 (TRFM2, 3) is turned on.
Eject Fan Eject fan motor (EFM) is turned on.
ISU Fan Scanner fan motor (SFM) is turned on.
ALL All fan motor are turned on.