Kyocera TASKalfa 400ci - Remarks on Main PWB Replacement

2JZ/2JX/2JV/2H7
1-6-2
1-6-2 Remarks on main PWB replacement
When replacing the main PWB, remove the EEPROM from the main PWB that has been removed and then reattach it to
the new main PWB.
Figure 1-6-2
When refitting DIMM, check "CODE", "FLS" and "SPI" marked on the PWB and refit them to the original positions.
Figure 1-6-3
DDR
DIMM
EEPROM
Main PWB
YS5
YS2
YS1
CODE
FLS
SPI
Main PWB