2JZ/2JX/2JV/2H7
2-3-15
YC16 A1 NC - - Not used
Connected
to the devel-
oping motor
MCY, clean-
ing motor
MCY, devel-
oping motor
K, cleaning
motor K
A2 DLP_CL_MT_C
LK
O 0/3.3 V DC (pulse) DEVM-MCY clock signal
A3 DLP_CL_MT_DI
R
O 0/3.3 V DC DEVM-MCY drive switch signal
A4 DLP_CL_MT_D
R
O 0/3.3 V DC DEVM-MCY: On/Off
A5 DLP_CL_MT_R
DY
I 0/3.3 V DC DEVM-MCY ready signal
A6 PGND - - Ground
A7 PGND - - Ground
A8 +24V1 O 24 V DC 24 V DC power to DEVM-MCY
A9 +24V1 O 24 V DC 24 V DC power to DEVM-MCY
A10 NC - - Not used
A11 RUB1_MT_CLK O 0/3.3 V DC (pulse) CLM-MCY clock signal
A12 RUB1_MT_DIR O 0/3.3 V DC CLM-MCY drive switch signal
A13 RUB1_MT_DR O 0/3.3 V DC CLM-MCY: On/Off
A14 RUB1_MT_RDY I 0/3.3 V DC CLM-MCY ready signal
A15 PGND - - Ground
A16 PGND - - Ground
A17 +24V1 O 24 V DC 24 V DC power to CLM-MCY
A18 +24V1 O 24 V DC 24 V DC power to CLM-MCY
B1 NC - - Not used
B2 DLP_BK_MT_C
LK
O 0/3.3 V DC (pulse) DEVM-K clock signal
B3 DLP_BK_MT_DI
R
O 0/3.3 V DC DEVM-K drive switch signal
B4 DLP_BK_MT_D
R
O 0/3.3 V DC DEVM-K: On/Off
B5 DLP_BK_MT_R
DY
I 0/3.3 V DC DEVM-K ready signal
B6 PGND - - Ground
B7 PGND - - Ground
B8 +24V1 O 24 V DC 24 V DC power to DEVM-K
B9 +24V1 O 24 V DC 24 V DC power to DEVM-K
B10 NC - - Not used
B11 RUB2_MT_CLK O 0/3.3 V DC (pulse) CLM-K clock signal
B12 RUB2_MT_DIR O 0/3.3 V DC CLM-K drive switch signal
B13 RUB2_MT_DR O 0/3.3 V DC CLM-K: On/Off
B14 RUB2_MT_RDY I 0/3.3 V DC CLM-K ready signal
B15 PGND - - Ground
B16 PGND - - Ground
B17 +24V1 O 24 V DC 24 V DC power to CLM-K
B18 +24V1 O 24 V DC 24 V DC power to CLM-K
Connector Pin No. Signal I/O Voltage Description
To Next Page
Loading...
