2JZ/2JX/2JV/2H7
1-3-30
U051 When [Set Paper Loop Amount BW] is selected
Large size: 218 mm or more in width of paper.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
Figure 1-3-6
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value which is
changed adds also the value of [Small] each item and is pulled.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Display Description Setting
range
Initial
setting
Change in
value per step
MPT (Large) B/W Paper feed from MP tray
(when large size paper is used)
-30 to 20 0 1 mm
Cassette (L) B/W Paper feed from cassette
(when large size paper is used)
-30 to 20 0 1 mm
MPT (Small) B/W Paper feed from MP tray
(when small size paper is used)
-30 to 20 0 1 mm
Cassette (S) B/W Paper feed from cassette
(when small size paper is used)
-30 to 20 0 1 mm
Original Copy
example 1
Copy
example 2
To Next Page
Loading...
