Kyocera TASKalfa 400ci - U148 Setting Drum Refresh Mode

2JZ/2JX/2JV/2H7-1
1-3-75
U148
Setting drum refresh mode
Description
Selects the mode used in drum refreshing
Purpose
Change settings when drum refreshing is too frequently executed.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
OFF Drum refreshing is not performed
ON Drum refreshing is performed