Kyocera TASKalfa 400ci - Connectors YC25 - YC27

2JZ/2JX/2JV/2H7
2-3-20
YC25 B3 +5V1 O 5 V DC 5 V DC power to FUM
Connected
to the eject
motor, paper
full sensor,
fuser motor,
fuser clutch
and fuser
fan motor
B4 FSR MOT DR O 0/3.3 V DC FUM: On/Off
B5 FSR MOT CLK O 0/3.3 V DC (pulse) FUM clock signal
B6 FSR MOT DIR O 0/3.3 V DC FUM drive switch signal
B7 FSR MOT LOCK I 0/3.3 V DC FUM lock signal
B8 FSR MOT GAIN O 0/3.3 V DC FUM gain signal
B9 +24V2 O 24 V DC 24 V DC power to FUCL
B10 FSR_CLT O 0/24 V DC FUCL: On/Off
B11 FSR_FAN O 0/24 V DC FUFM: On/Off
B12 +24V2 O 24 V DC 24 V DC power to FUFM
YC26
A5 CONTAIN_MT_
CLK
O 0/3.3 V DC (pulse) TCM clock signal
Connected
to the toner
container
motor,
developing
fan motor 3/
4 and toner
motor M/C/
Y/K
A6 CONTAIN_MT_
DIR
O 0/3.3 V DC TCM drive switch signal
A7 CONTAIN_MT_
DR
O 0/3.3 V DC TCM: On/Off
A8 CONTAIN_MT_
RDY
I 0/3.3 V DC TCM ready signal
A9 PGND - - Ground
A10 PGND - - Ground
A11 +24V1 O 24 V DC 24 V DC power to TCM
A12 +24V1 O 24 V DC 24 V DC power to TCM
B1 SUB_DLP_FAN O 0/24 V DC DEVFM4: On/Off
B2 +24V1 O 24 V DC 24 V DC power to DEVFM4
B3 TMOT1 DR O 0/24 V DC TM-M: On/Off
B4 TMOT1RTN I Analog TM-M return signal
B5 TMOT2 DR O 0/24 V DC TM-C: On/Off
B6 TMOT2RTN I Analog TM-C return signal
B7 TMOT3 DR O 0/24 V DC TM-Y: On/Off
B8 RMOT3RTN I Analog TM-Y return signal
B9 TMOT4 DR O 0/24 V DC TM-K: On/Off
B10 TMOT4RTN I Analog TM-K return signal
B11 REAR DLP FAN O 0/24 V DC DEVFM3: On/Off
B12 +24V1 O 24 V DC 24 V DC power to DEVFM3
YC27
1 EH RDY
(PFRDY)
I 0/5 V DC Paper feeder ready signal
Connected
to the
optional
paper feeder
and optional
document
finisher
2 EH RDY (DF
RDY)
I 0/5 V DC Document finisher ready signal
3 PF FEED O 0/5 V DC Paper feeder control signal
4 PF SEL O 0/5 V DC Paper feeder select signal
5 DF SEL O 0/5 V DC Document finisher select signal
6EH SCLK (PFS-
CLK)
O 0/5 V DC (pulse) Paper feeder clock signal
7EH SCLK (DFS-
CLK)
O 0/5 V DC (pulse) Document finisher clock signal
Connector Pin No. Signal I/O Voltage Description