Kyocera TASKalfa 400ci - Detaching and Refitting the MP Unit

2JZ/2JX/2JV/2H7-1
1-5-6
(2) Detaching and refitting the MP unit
Follow the procedure below to replace the MP unit.
Procedure
1. Open the front cover.
2. Remove the right filter.
3. Remove five screws and remove the right
cover.
Figure 1-5-9
4. Remove one connector.
5. Remove the MP tray.
Figure 1-5-10
Screw
Screws
Right cover
Screws
Right filter
MP tray
Connector