2JZ/2JX/2JV/2H7-1
1-3-67
U132
Replenishing toner forcibly
Description
Replenishes toner forcibly until the toner sensor output value reaches the toner feed start level.
Purpose
Used when the toner empty is detected frequently.
Method
1. Press the start key. The screen for executing is displayed.
2. Press the start key. Operation starts, and the current data is displayed.
Toner is replenished until the toner sensor output value reaches the toner feed start level.
3. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U135
Checking toner motor operation
Description
Drives toner motors.
Purpose
To check the operation of toner motors.
Remarks
When driving the toner motors long time or several times, developing section becomes the toner full and is
locked.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
4. To stop the operation, press the stop key.
Completion
Press the stop key after operation stops. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Toner Supply (C) Toner feed start level (cyan)
Toner Supply (M) Toner feed start level (magenta)
Toner Supply (Y) Toner feed start level (yellow)
Toner Supply (K) Toner feed start level (black)
Toner Sensor (C) Toner sensor output value (cyan)
Toner Sensor (M) Toner sensor output value (magenta)
Toner Sensor (Y) Toner sensor output value (yellow)
Toner Sensor (K) Toner sensor output value (black)
Display Operation
Toner Feed Motor Toner motor (TM) is turned on
Container Motor (CW) Toner container motor (TCM) is turned on counterclockwise
Container Moter (CCW) Toner container motor (TCM) is turned on clockrwise
To Next Page
Loading...
