2JZ/2JX/2JV/2H7-1
1-3-59
U107
Setting: [Belt Clean A(BW)]
1. Change the value using the +/- or numeric keys.
2. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
Width<160 Small sizes (under 160 mm wide) 0 to 255 120
160<=Width<220 Medium sizes (160 to under 220 mm
wide)
0 to 255 120
220<=Width Large sizes (more than 220 mm wide) 0 to 255 120
To Next Page
Loading...
